●“No” Malfunction
-Superior following response to every position change
A built-in magnet location in a float is detected by a magnetic sensor and its signal is transmitted to illuminate LED
-The new model does not use mechanical roller and it does not cause any indicator malfunction (such as roller does not turn), that was noticed at previous magnetic float models

●Possible to monitor from remote area (only at SLG-C model)
-A sensor unit transmit digital signal (RS-232C) to PC,　that enables remote monitoring via PC

(1) Independent indication system for standalone use
・A single row of LEDs directly is switched on and off by a small magnet.
・A magnetic float moves along the row of LEDs.
・As the magnetic float moves along the LEDs, they are sequentially switched on or off according to the direction.
・The position of the magnetic float is indicated by the LEDs.

(2) External indication system ・A sensor detects movement of the magnetic float, transmitting a signal to the control unit.
・The liquid level can be checked remotely with a computer.
・The LED pattern used to indicate the liquid level can be set beforehand.
・Malfunctions and failures are self-diagnosed.
・Offsets between the float and liquid level can be adjusted using the relative density of the liquid.

As per its name, the direct view liquid level gauge is a device that allows the level of liquid remaining in a tank to be checked visually. It is suitable for use in industrial plants.

For around half a century, Sawada Seisakusho has been manufacturing not only such tanks, but also water level gauges under the OBK brand capable of handling electric power generation boilers from low to high pressure (up to 21 MPa).

They are experts in their field with many happy customers in Japan and abroad. In Japan, they hold approximately 50 percent of the market.

For tanks, their most popular type of liquid level gauges use round glass tubes, with valves available in a wide lineup suited to any operating environment, ranging from stainless steel and vinyl chloride to lined models.

For electric power generation boilers, Sawada Seisakusho manufactures water level gauges capable of high-pressure use.

Water level gauges for electric power generation boilers ?Reflecting type 1.0 to 2.0 MPa
・See-through type 1.0 to 8.0 MPa
・Dual-color type 1.0 to 8.0 MPa
・Dual-color multi-port type 0 to 21 MPa

The Flow Sight is installed along a pipe to allow direct visual checking of liquid flowing within.

An internal flapper and ball make it easy to observe the liquid flow.

The Flow Sight comes in both flange and screw-in models.

Flow Sight models